Check your Work
BEAMS
This tool allows you to check your work on basic beam problems. In your homework solution, show your work.
Simply-Supported Beam
Cantilever Beam
©2002-2009, Dominic J. Dal Bello

Simply Supported Beam, Linearly Increasing Load, q=(x/L)qo

Input: Values of applied distributed load and length*
  qo =  value of maximum distributed load (positive up, force/length)
  L  =  total length of beam
    


Output: Reactions at Wall:
  RA =  reaction at Left Support (A) (+ up)
  RB =  reaction at Right Support (B) (+ up)

Magnitude of Maximum Shear and Moment:
  Vmax  =  magnitude of Max. Shear Force
  Mmax =  magnitude of Max. Moment
                                 
 at x = 0.5774L

Back to top - Main Menu

  • Use consistent units: [pounds & inches], [pounds & feet], [newtons & meters], etc.
  • Do not mix inches and feet, meters and millimeters, inches and meters, etc.
  • Results are in terms of the units system you are using. If you enter the force in pounds and the distances in feet, the resulting forces are in pounds, and moments in pound-feet.
© 2002-2009, Dominic J. Dal Bello
Top