e170 pages updated: 01/08/18
Current Announcements  01/08/18
ASSIGNMENTS
Updated 01/08/18
Date
Subject
Remark
1/08/18
Lab Manual

Please purchase in Bookstore before Week 1's lab.

01/18

NEW ROOM

We are not in M-439 (no longer in M-212)

01/19

Outside Assginment
For Monday,
Jan. 22.:

Read Syllabus
Watch Videos
Do Outside Activity

No class meeting on Monday, 1/22.

Outside Assignment in place of class:

1. Read the syllabus. Know it.
2. Watch the following video ... from Minute 23:00 onward (skip the first 23 minutes).

EGGN 281 Lecture 1
     Lecture 1 Introduction (~23 min.)    

and:

Michael van Biezen's Introductory Lectures:
   Basics Concepts (3 of 7) Current (4 min)
   Basics Concepts (5 of 7) Voltage (6 min)

3. Read the Cramers Rule handout Cramer's Rule 3x3.
Using Cramer's Rule, do the following Outside Activity
and turn it in at the start of class on Wednesday, 1/24.

Hardcopies of the Syllabus and the Activity are on the file cabinet outside of my office in M-309.

01/04
Week #1

M 1/22: No Class... DO OUTSIDE ASSIGNMENT listed above.
W 1/24: Syllabus, Chapt 1
R 1/25: Intro, Resistor Color Code, Basic Measurements

01/04
Week #2

M 1/29: Chapt 2 Ohm's Law, Kirchoff's Laws
W 1/31: Chapt 2 Series Resistors/Voltage Division; Parallel Resistors & Current Division.
R 2/1: Expt. #1 Ohm's Law

 
Resistor Codes
electroninstructor: Resistor Color Codes
 
Schematics
MAKE: Collin's Lab, Schematics
05/28/14
Videos
Link above (or here) for some videos on Circuit Analysis
2/22/16
Cramer's Rule Example
Cramer's Rule 3x3
-
Hints
Resistor Codes & Capacitor Hints
7/23/13
Errata, 5th Ed.
Errata for 5th Edition of Textbook
9/26/13
Notes for Exams

Exam Notes
1 side of 8.5"x11" sheet of paper for notes:
 - equations
 - procedures
 - NO worked-out problems (neither numerical nor algebraic).
Scientific Calculators only (see note below)

8/22/10
Calculator Policy
The AHC Engr. Program Calculator Policy for exams is posted on the AHC Engr. Program Home page (link at left).
01/08/18
OrCAD 16.6
Lite Demo Software
(Capture and PSpice only)

You may download to your own laptop:

OrCAD 16.6 Lite DEMO Software (Capture and PSpice Only): http://www.orcad.com/resources/orcad-downloads

We will use this software for Expt #6.

• This web site is not an official site of Allan Hancock College.
This site may be navigated with the menu to the left

The Allan Hancock web site may be accessed by clicking on the "Allan Hancock" logo at the upper left. 
A new window will be opened when any of the links in the top menu are selected.