Instructions:
Refer to Lab #7 in your Lab Manual, even if you are to do the virtual version of this lab. The differences between the Real and Virtual versions of this experiment include:

• the percent carbon content of the three steel samples you are to look at; and
• the degree of magnification (the virtual version used SEM-generated micrographs).

As in the real lab version, you should make a sketch of the steel samples that you view. To determine the magnification of your drawing, use the scale on the micrographs of the virtual microscopes and an S.I. ruler.

MICROGRAPH IMAGES:
The Internet Microscope
www.umist.ac.uk/intmic/
© Dr. James Marrow
Manchester Materials Science Centre, UMIST and University of Manchester.

Lab #7:
D.J. Dal Bello
Allan Hancock College

Select a Sample to View:   C1018   -   C1030   -   C1080

LOOK AT, but DO NOT analyze C1080 - Spring 2012